Buy Cheap, Make Better

In the binary existence set forth by the average internet comment, tools are bucketed into either the best ever built, or worthless piles of scrap that, if they don’t kill you first, will turn whatever you are machining/hammering/bending/drilling with them into similarly worthless scrap. While remembering that bad tools can be dangerous, there is a large, rich area between cheap and death-inducing, and perfect. In this realm, tools are imperfect but safe, useful and accessible. And they’re often salvaged from crap status and put there by the efforts of their owners. Spend some time improving a cheap tool, and you can end up with great gear without the bank loan, and most of all pickup a bunch of knowledge that will pay off when you work on more elaborate projects. Here are two things that, with little effort, I was able to make much more usable and durable than they were when I got them.

Harbor Freight Hoist

Engine hoists cost either way more money than you want to spend on such a thing, or way more than you can afford. Many of us settle for the former scenario, and trudge begrudgingly down to Harbor Freight when the need arises to get one that, by first glance, looks and works alright.

The Problem: The bolt that serves as a hinge at the back of the arm is affixed to the vertical support via 2 think tabs of steel welded on. Things look sturdy enough, but a closer examination revealed in my case that what was strong was not straight. As a result, the arm of the hoist was canted to the right by about 4 inches from center when fully extended. Fortunately, I was enrolled in a welding class at the local “Institute of Technology” (i.e. community college, not sure what is wrong with the term “community college” that requires the Orwellians to put their grubby mitts all over it) in which we were given the opportunity to bring in our own projects. The instructor and I made quick work of this problem – an hour or less – with a grinder and a MIG, cutting off the hinge mounts and making a new one from a single piece of square tubing. The bonus here was that, as I was repairing something that would need to take a lot of weight, any insufficient work was pointed out by a certified boilermaker and redone to standard.

The payoff: What resulted was a hoist that felt completely different, devoid of the concern inducing bending of metal to the favored side, and that has given years of trouble-free service.

$25 Shop Stool

A ruptured disk last year sent me to Summit for something to sit on while working to ease the sciatica. Unenthused about any of the selections, I was thankful to at least find one for cheap. 5 legs, wheels, it was light and held up for a few months.

The Problem: Like every garage creeper or stool with casters, the threads on the wheels loosened and stripped themselves out. I dove into the scrap pile and found 3 pieces of square tubing and set about the following list for a quick but massive improvement to a 25 dollar stool.

  1. Removed the legs.
  2. Cut them from the collar that holds the bottom of the stool and ground the collar somewhat smooth.
  3. Trimmed the scrap square tubing to roughly 14 inches to match the dimensions of the old base.
  4. Marked the center of each and drilled out with a 2 inch hole saw. This produced 6 legs with the proper contour at the inside edge to weld to the collar.
  5. Lined up the legs with clamps, got out the MIG and began to weld away.
  6. Done with this part and am using the stool. Wheels are ordered and will go on next, and then fun with a ring bender and some bar stock to create a circular tool tray over the casters. But in a couple of hours, I now have a sturdier stool.

The Payoff: 2 hours of work and some free materials produced a bunch of experience and learning on a project that had no consequences if it was completely ruined. Within a couple of hours and 24 welds, I had a much sturdier stool. Number 24 was certainly better than number one, but all welds were hardly visible. You can spend a lot more time and really mess up an expensive car project with 24 welds.

Advertisements

Join the Conversation

2 Comments

Leave a comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Create your website at WordPress.com
Get started
%d bloggers like this: